Low Alloy Steel electrodes|E9016-D1

Tel：+86-311-89920356

+86-311-80663150

+86-311-80663151
Fax：+86-311-89920355

E-mail：
sales@sunli-welding.com
benitohwen@sunli-welding.com

Skype: benitohwen123@hotmail.com
QQ: 2486280638
Zip/Post Code: 050000
Office Address：Room 1704, Jinshi Building B, Xinshizhong Road, Shijiazhuang City, China.

Your position is:Home>>Low Alloy Steel electrodes

GB：E6016-D1
AWS：E9016-D1
Application：Used for welding medium-carbon steel and low-alloy high strength steel structures with corresponding strength, such as 15MnVN, etc.：

E9016-D1

According with GB E6016-D1
Corresponding with AWS E9016-D1

Introduction: E9016-D1 is a kind of low-alloy high strength steel electrode with low-hydrogen potassium type coating. AC/DC. All-position welding. When welding with AC, its performance stability is a little worse than that when welding with DC.

Applications: Used for welding medium-carbon steel and low-alloy high strength steel structures with corresponding strength, such as 15MnVN, etc.

Chemical Composition of Deposited Metal (%)

Chemical Composition	C	Mn	Si	S	P	Mo
Guarantee Value	≤0.12	1.25~1.75	≤0.60	≤0.035	≤0.035	0.25~0.45
General Result	≤0.10	~1.40	≤0.40	≤0.030	≤0.025	~0.30

Mechanical Properties of Deposited Metal

Test Item	R_m(MPa)	R_eL或R_p0.2(Mpa)	A(%)	KV₂(J)
Guarantee Value	≥590	≥490	≥15	≥27(-30℃)
General Result	620~680	≥500	20~28	≥47

Diffusible Hydrogen Content in Deposited Metal: ≤4.0ml/100g(Glycerine Hydrogen Test)

X-ray Radiographic Inspection: ⅠDegree

Reference Current (AC, DC+)

Electrode Diameter(mm)	φ3.2	φ4.0	φ5.0
Welding Current (A)	80~140	110~210	160~230

Instructions:
1.The electrodes must be baked under about 350℃ for an hour before welding, and used as soon as baking is completed.
2.The stains on the weld, such as rust, oil stains, moisture, etc., must be cleared.
3.When welding, short arc must be used and stringer bead is suitable.
4.If the weld are very thick, they should be preheated under over 150℃ and cooled down slowly after welding.

Packing details: In carton of 20kgs/net, consisting of 8 boxes x 2.5kgs for 2.5mm, & 4 boxes x 5kgs for other sizes.

With/ without pallets (Fumigation-free pallets) upon customer’s request.

es x 5kgs for other sizes.

With/ without pallets (Fumigation-free pallets) upon customer’s request.

Type="1" TCSC="0" w:st="on">2.5mm, & 4 boxes x 5kgs for other sizes.

With/ without pallets (Fumigation-free pallets) upon customer’s request.

pan>With/ without pallets (Fumigation-free pallets) upon customer’s request.

or 2.5mm, & 4 boxes x 5kgs for other sizes.

With/ without pallets (Fumigation-free pallets) upon customer’s request.